Products > Kits>Falcon Dual Pressurized HUD Kit

Falcon Dual Pressurized HUD Kit

Dual Pressurized HUD Kit: $4,299.00      

 

Angle of Attack Indicator, for precise and instantaneous lift alerts for your aircraft. Multi display kits available. Call or email for more information.

 

FIND DEALERS AND INSTALLERS

 

 


KIT FEATURES

The Dual Pressurized Falcon kit has two vertical light bar style displays and two HUD adapters. With the vertical light bar display, when you come in for a landing you want to fly to the blue LED (on speed for landing). Should you come in with too low of an angle of attack, the display will illuminate into the yellow, telling you to put your nose up. Should you come in with too high of an angle of attack, the display will illuminate red, telling you to put your nose down.

 

  • Instantaneous Angle of Attack indication.
  • Three point calibration process, programmed on remote switch panel, to aircraft specific lift curve.
  • 16 different LED brightness levels from ultra dim to very bright.
  • Display has an imbedded photocell for daytime/nighttime brightness settings, choice of which is programmed at the display.
  • Audio output, tied to existing audio input on audio panel by others.
  • 4 different audio options to choose from which is programmed by the end user at the remote switch panel.
  • Audio mute switch with amber LED indicator located on remote switch panel.
  • 12-28 VDC input draws less than 0.250 Amps at full brightness.

Falcon Dual Pressurized Kit with HUDs Part #: DSTR-AOA-9200DPK


KIT COMPONENTS

  • Two Falcon Displays

  • Switch Panel Module

  • Pressurized I/F Module

  • Sensor I/F Module

  • Dual Display I/F Module

  • Non Heated Standard Probe

  • 9x9 Probe Mounting Plate

  • Two HUD (Heads Up Display Adapter)

  • Two HUD Covers

  • 6ft Power Cable

  • Two 6ft Display Extension Cable

  • 15ft Sensor I/F + Audio Interior Cable

  • 15ft Sensor I/F Module Exterior Cable

  • 6ft Dual Display I/F Module Extension Cable

  • 6ft Switch Panel Extension Cable

  • 25ft Blue Pneumatic Hose

  • 25ft White Pneumatic Hose

  • Falcon Installation Manual

  • Falcon Operations Manual

  • Protractor

  • Probe Cover

  • Screwdriver


ADAPTER KITS / ADD ONS

TECHNICAL SPECIFICATIONS

Complete Kit Weight Less than 3.00 lbs. Click here for full list.
 
AOA Interface Module size In Inches: 5.75 x 2.60 x 1.65
 
System Voltage Requirements 12 - 28 Volts DC
 
System Max Power Draw 0.250 Amps
 
System Power Cable 6 ft, three wires: power, ground and shield
 
Heated Probe Voltage Requirements 12 or 24 VDC (must specify when ordering)
 
Heated Probe Power Draw 86 Watts at 12VDC / 172 Watts at 24VDC
 
Heated Probe Current Draw 8 Amps at 12VDC and 8 Amps at 24VDC
 
Heated Probe Power Wire Supplied by others
 
Audio Output 1 Volt P-P max at 300 ohm input impedance
 
Aux (Audio) Cable 6 ft, three wires: AP audio, AP ground and shield
 
Audio Options Four
 
Mute Switch Yes, on switch panel.
 
LED Brightness Levels 16, from ultra dim to very bright
 
Photocell Diode On display, allows for custom daytime/nighttime brightness settings
 
Pressurized Version Yes

MANUALS & GUIDES

Installation Manual Download
 
Operations Manual Download
 
Quick Calibration Guide Download
 
Calibration Failures Guide Download
 

TECHNICAL DRAWINGS & DIAGRAMS

Dual Connection Diagram Download
 
Display Dimensions Download
 
Increasing AOA Diagram Download
 
Display Segment Transitions Download
 
HUD Dimensions Download
 
HUD Base Plate Dimensions Download

PHOTOS

...

Videos

Falcon Display Option 1

Falcon Display Option 1

 
Falcon Display Option 2

Falcon Display Option 2

Falcon Display Option 3

Falcon Display Option 3